• Carrinho
  • O carrinho está vazio!

Esqueceu-se da sua palavra-passe?

Or connect with

You will find some of the frequently asked questions about products. If you cannot find here an answer to your question please contact us
  1. Check camera settings for flashing light.
  2. Check the battery is full of power and correct installation
  3. Check the hot shoe of camera and flash is in good connection
  4. Check that the flash is suitable for your camera
  5. Check if the flash is overheated
  6. Check if flash mode is wrong
This buzz switch could be closed but in this situation all the voice was closed. please check enclosed image, C.Fn-14-1 means the buzz off.
Here are the steps:
  1. Press ON to open the flash
  2. Long press Fn button for about 3~4 seconds
  3. Press up button to change the number to 14
  4. Press the right button to change the number to 1, then click YES,means buzz function was closed;left button to change number to 0, then click YES, means the buzz function was on.
PS. These steps could also be found on instruction manual
There are 6PCS adapter ring included in this flash, here is the size:
52 55 58 62 67 77mm, as long as your lens size is one of them, then could be used,
Here is the way to check your lens size:
Your camera's lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap. This number is always preceded by a "?" (diameter) symbol. For example: ?52 = 52mm lens thread size.
If your lens size is none of them, please tell us, we may include the size you need but at this case, this item must be shipped from China so that we could pack with this adapter ring you need.